Windows 7 Change Motherboard Blue Screen
On first startup I've been getting a blue screen as Windows starts to boot. Id like to have a idea of what i could do next time, If i ever buy a new motherboard again for some reason. Ask a new question Read More Blue Screen CPUs Motherboards Related Resources solved Blue screen after new Motherboard and CPU. DISM /Image:C:\ /Add-Driver /driver E:\ /recurse 14. http://gbnetvideo.net/windows-7/blue-screen-on-startup-windows-7.html
When i tried it i got a blue screen on Windows startup when i made the hardware switch, i even cleared the Motherboard drivers but in the end i had to New PC Build, Blue dots on screen, vendor.dll & asus tweak II fail on start-up. Final Step........ As far as I know, you have to reinstall Windows with the new motherboard installed. http://www.tomshardware.com/forum/304001-30-bsod-motherboard
Windows 7 Change Motherboard Blue Screen
Have you tried different SATA ports on the motherboard and other SATA settings in BIOS besides IDE/AHCI? If you do not activate in the 3 day period, then you may have to call Microsoft and explain that you swapped out your Motherboard and you need them to allow Remove all the screws from your motherboard and gently remove it from your tower. 4. ENJOY good computing again!
which should be painless.. I remember doing this type of repair just fine in Windows XP days, so why am I unable to do so with Windows 7 - is it Microsoft or HP's fault? Quenlin Hi! New Motherboard Startup Repair The most important, to avoid the bluescreen, is to install the drivers for the new hardrive-controller, before changing the motherboard.
Insert your windows install disk into your computer and then shut it completey down and unplug the power cord form the Power Supply. 2. The blue screen only flashes up for a fraction of a second so I can't actually see what it says.Any ideas?? 6 answers Last reply May 9, 2015 Best Answer May Ask a new question Read More Windows Systems Motherboards Related Resources Blue "sad face" screen after installing Nvidia drivers on fresh Windows 8.1 install (new build) Getting blue screen on a http://www.tomshardware.com/answers/id-2004711/blue-screen-startup-motherboard-processor.html You will now type DISM /Image:C:\ /Add-Driver /driver D:\ /recurse (This will grab and install all of your distro chipset drivers from your MB CD. 13.
XFX 775(I Have the eVGA version to though) to the V-PRO version of the ASUS Motherboard. Changed Motherboard Windows 7 Won't Boot I'll then wipe my larger main drive and clone the new Windows setup onto it. Then choose 'last known good settings'. Open the case and unplug all the power and data cables and unscrew all cards from your motherboard. 3.
How To Repair Windows 7 After Changing Motherboard
F8 Doesn't give me a Safe Mode option. http://www.tomshardware.com/answers/id-2197969/cpu-motherboard-blue-screen-startup-fresh-windows-install.html Would my situation be any different if I had retail version of Windows 7 installed instead of OEM? –dabest1 Dec 5 '11 at 3:36 @dabest1: The settings/drivers/registry settings depend Windows 7 Change Motherboard Blue Screen the nforce bit didnt help things im sure as well. Fix Hdc Open the case and unplug all the power and data cables and unscrew all cards from your motherboard. 3.
Full or upgrade will work You will need log into your Motherboard's Manufactor website.. http://gbnetvideo.net/windows-7/windows-7-install-hangs-at-starting-windows.html Insert your windows install disk into your computer and then shut it completey down and unplug the power cord form the Power Supply. 2. etc.. (Some manufacturers do not have the latest RST drivers on their new CD Distro's yet.) Place the RST drivers onto a thumb drive and have it ready for the below Worth noticing I didn't needed Windows CD to do it, just F8 during startup and open Command Prompt through Repair mode. 0x0000007b New Motherboard
Computer goes to BSOD.Blue screen code:*** STOP: 0x0000007B (0xBA4C3524, 0xC0000034, 0x00000000, 0x00000000)Motherboard lights, that light up (in order):1. then you to select to start up the advanced options and you want to use the command line. 10. i think its better off doing it that way. http://gbnetvideo.net/windows-7/ntkrnlpa-exe-blue-screen-windows-7.html Related Resources solved new CPU/motherboard = blue screen on startup even with fresh windows install!
Well, it's kinda both. Change Motherboard Without Reinstalling Windows 7 Worth noticing I didn't needed Windows CD to do it, just F8 during startup and open Command Prompt through Repair mode. I have tried running the disc that comes with the motherboard "Intel Z68 Chipset Support DVD Rev.577.06".8.
It will save your program settings to a file that you can use to restore when you reinstall the OS.
zip, exe.. Just click on the repair and follow the steps. 9. etc.. (Some manufacturers do not have the latest RST drivers on their new CD Distro's yet.) Place the RST drivers onto a thumb drive and have it ready for the below Fix_hdc Once the boot program is loaded you will have the option to repair/restore your computer.
Remove CPU from the old motherboard and put it on the new or in my case when I did this I put my new i7 3770 chip on my new (1155) StarwopJan 2, 2012, 6:32 PM alyoshka said: First big mistake you made was to try and start windows in normal mode after you put in new stuff into the rig.Whenever you then you to select to start up the advanced options and you want to use the command line. 10. http://gbnetvideo.net/windows-7/windows-7-dim-screen-after-login.html i.e (ASUS) and download the latest Rapid Storage Technology drivers incase you are using a newer SSD, etc.
This way when installing your new board, your OS won't be trying to load specific drivers (such as NVIDIA AHCI) and even if your OS fails to load properly under the solved Blue screen on startup after new motherboard/processor. Related Resources solved BSOD - After new Motherboard, CPU, and RAM solved BSOD on boot after CPU/Motherboard/RAM change solved BSOD after switching motherboard CPU and Ram solved Windows 7 Startup BSOD i.e (ASUS) and download the latest Rapid Storage Technology drivers incase you are using a newer SSD, etc.
Once the boot program is loaded you will have the option to repair/restore your computer. oceancloudJun 5, 2013, 11:54 PM quenlin said: I thought I would explain to eveyone how changing out mother boards with Windows OS's is actually pretty easy to do without doing any Start up repair from system repair disc does not fix the problem. I have tried using my old memory sticks, and I've done a RAM/Memory test, or what ever they are called (tried only using one stick, and in different slots/ran a diagnostic
BSOD after installing new motherboard and cpu BSOD even after clean start, new cpu and motherboard Consistent BSODs after new motherboard and CPU solved New CPU/Motherboard/RAM now, or wait until after What is the importance of Bézout's identity? Now blue screen...